490,00€
You are a speed enthusiast and you are looking to overtake everyone in the spot, you are looking for a fin that will have no limits. You’ve found it, it’s the new HA 550 S. You will no longer have any excuses to overtake everyone else on the water.
The more pressure you apply to the front leg to accelerate, the more stable and faster this wing will be, while maintaining exceptional low-end power that will allow you to take off very early.
The incredible stability at high speeds will give you all the confidence you need to push your limits.
The aspect ratio of the HA 550 S wing has been optimised for maximum speed.
Will you have the courage to push your limits?
| Weight | 1,5 kg |
|---|
The HA 550 S will allow you to push your speed limits. If you want to exceed 30 knots and beat your record, the 550S HA will help you. From 18 knots of wind for a size of 80 kg, you can take off by pumping.
There will be no limit on wave sizes.
Charged with adrenal, the surfer will face waves that have never been surfed. The maximum speed is approaching 34 knots.
You like to practice different sports and you want to kitefoile and winger at full speed with ease. You are looking for a front wing that allows you to kiteoil at full speed without limit. Then you’ve found the right option for you.
Speed Profile.
Vitesse
impressionnante
This fin is designed to allow you to take full control of your sailing, giving you the confidence to tackle any spot. You’ll be able to push your limits, without worrying about being overtaken or overtaken.
Incomparable gliding sensation
The HA 550 is the result of careful engineering, with lightweight and strong materials that reduce drag to a minimum, allowing you to sail comfortably even at high speeds. You’ll instantly feel an impressive acceleration.
Aluminium and carbon foil
Slim profile
We have refined the tips (tips of the kite) to make it easier to maneuver your foil and discover true waveriding.
For whom?
The 550 S HA is the fin that has limitless speed for those who want to reach extreme speeds and surf big waves /swells.
Characteristics
Aspect ratio
8,3
Scale
678cm
Construction
Carbon M40J
The 670 HA is the big sister of the 550 S HA. From 15 knots of wind, this fin is a good option to allow you to reach speeds close to 30 knots with ease.
Aspect ratio
7,9
Scale
70cm
Construction
Carbon M40J
The 810 HA is made for those who want to reach high speeds while keeping a fine flight on the swells.
Aspect ratio
7,9
Scale
78cm
Construction
Carbon M40J
This front wing is designed for those who want to go fast and push their limits. The limit will no longer be the material but your ability to accept to go fast. This 550 S HA wing starts relatively early and can be used from 18 knots of wind for a size of 75 kg.
To fully exploit this type of kite, it is necessary to have a good technical level or to be very light. A scrambled level ++ is recommended with good pumping efficiency (wing/board) to start early.
This wing is not for beginners. It can be used for small guys but will not allow you to start.
The 180 cm2 stabilizer is ideally suited to the 550 S HA. The 240 cm2 will be able to work but will slow down the foil.
To go fast, you have to move the foil back on the board.
So we recommend a fairly remote positioning for a size of 80 kg or less.
A heavier jig will have to move the foil forward in the US rails
The ideal stabilizer is the 180 cm2. We recommended putting a little positive angle on the stab between 0’75 and 1.5 ° depending on your level and size.
Yes, this front wing can be adapted to the Sfoil Alu or the Carbon foils. The performance will be better on carbon foils because the glide will be significantly improved with a thinner mast. However, with an aluminum foil you will be able to get close to 26-27 knots of vmax with this fin if you are good.
Technically, there are no board size restrictions. But the wider and longer the board, the less effective this fin will be. So ideally in the SROKA range, you should use board sizes below 5’3 superfly in 86 l or on the LW 5’7 and 6’2.
The smaller the board, the greater the yield.
We recommend this fin for Wingfoil, Kitefoil and Tow in towed surfing.
It usually takes one business day to prepare your order and then one to three business days for delivery.
Yes. Like all the products on the site, Sroka foils are covered by a two-year warranty!
SROKA SHOP
62 rue de Penhoat – 29850 Gouesnou, France
Timetables
Monday to Friday
9:15 a.m. to 5:45 p.m.
