Additional information
Weight | 1,5 kg |
---|---|
TAILLE MAT | |
Surface du stabilisateur | |
Front fin | UHA 700, UHA 800, UHA 930, UHA 1100, UHA 1260 |
1150,00€ – 1210,00€
Discover the S Foil Alu in UHA
Soaring like a bird, skimming the crest of the waves at full speed as you effortlessly descend the swell trains, becomes a reality with our UHA (Ultra High Aspect Ratio) range. This range, with a large wingspan, allows you to foil almost without wind and swell. Use all the energy available in the little swell to maintain the foil and fly on swell trains.
Our aluminum S Foil is designed to provide exceptional strength and durability while remaining lightweight and maneuverable. The aluminum mast provides increased rigidity and a strong connection, ensuring optimal stability even in difficult conditions. If you are looking for a kite to go fast in downwind or to downwind in wing, UHA kites have been created for you and they will surprise you with their ease and performance.
UHA Wing Range
This range consists of 5 sizes of kites:
Key features
Speed, Glide and Maneuverability
It’s impossible to be disappointed with this UHA range. Speed, glide and handling are the three words that best characterize it. With our aluminum S Foil and UHA wings, every session becomes an unforgettable experience, whether you’re an ambitious beginner or an expert looking for new sensations.
Adjustment wedge supplied with this range.
The HA 670 S will allow you to push your speed limits while having a significant power base at low revs.
From 15 knots of wind for a size of 80 kg, you can take off by pumping.
Designed to glide without limit whatever the conditions you have.
The maximum speed is approaching 30 knots.
You are looking for a front wing that allows you to kiteoil at full speed without limit.
Then you’ve found the right option for you.
Speed Profile.
Vitesse
impressionnante
This fin is designed to allow you to take full control of your sailing, giving you the confidence to tackle any spot. You’ll be able to push your limits, without worrying about being overtaken or overtaken.
Incomparable gliding sensation
The HA670 is the result of meticulous engineering, with lightweight and durable materials that reduce drag to a minimum, allowing you to cruise comfortably even at high speeds. You’ll instantly feel an impressive acceleration.
Aluminium and carbon foil
Slim profile
We have refined the tips (tips of the kite) to make it easier to maneuver your foil and discover true waveriding.
For whom?
The 670 HA is the perfect choice for those who want to reach extreme speeds and surf big waves /swells.
Characteristics
Aspect ratio
7,9
Scale
70cm
Construction
Carbon M40J
1250
The 810 HA is made for those who want to reach high speeds while keeping a fine flight on the swells.
Characteristics
Aspect ratio
7,9
Scale
78cm
Construction
Carbon M40J
This front wing is designed for those who want to go fast and push their limits. The limit will no longer be the material but your ability to go fast. This 670 S HA wing starts relatively early and can be used from 18 knots of wind for a size of 75 kg.
To fully exploit this type of kite, it is necessary to have a minimum technical level. A scrambled level ++ is recommended with good pumping efficiency (wing/board) to start early.
This wing is not for beginners. It can be used for small guys but will not allow you to start.
The 180 cm2 stabilizer is ideally suited for the 670 S HA. The 240 cm2 will be able to work but will slow down the foil.
To go fast, you have to move the foil back on the board.
So we recommend a fairly remote positioning for a size of 80 kg or less.
A heavier jig will have to move the foil forward in the US rails
The ideal stabilizer is the 180 cm2. We recommended putting a little positive angle on the stab between 0’5 and 1° depending on your level and size.
Yes, this front wing can be adapted to the Sfoil Alu or the Carbon foils. The performance will be better on carbon foils because the glide will be significantly improved with a thinner mast. However, with an aluminum foil you will be able to get close to 26-27 knots of vmax with this fin if you are good.
Technically, there are no board size restrictions. But the longer the board, the less effective this fin will be. So ideally in the SROKA range, you should use board sizes under 5’4 94 l with us.
The smaller the board, the better the performance.
We recommend this fin for Wingfoil, Kitefoil and Tow in towed surfing.
It usually takes one business day to prepare your order and then one to three business days for delivery.
Yes. Like all the products on the site, Sroka foils are covered by a two-year warranty!
SROKA SHOP
62 rue de Penhoat – 29850 Gouesnou, France
Timetables
Monday to Friday
9:15 a.m. to 5:45 p.m.