760,00€
The 930 UHA will take you into another world. If you thought you’d seen it all, think again.
Is having the lift of a 1200 cm² and the speed of a 900 your dream?
We did it.
Easy to use, it will allow you to leave very early and fly at incredible speeds.
Hover like a bird grazing the crest of the waves at full speed as you go down the swell trains effortlessly.
This becomes a reality with our UHA:U range
ltra High Aspect Ratio. This range with a large wingspan allows you to foil almost without wind and without swell, taking all the energy needed in the swell to foil. If you are looking for a kite to go fast downwinding or downwinding in wing, UHA kites have been created for you and they will surprise you with their ease and performance. This range consists of 4 wing sizes : 800 UHA (800 cm²), 930 UHA (930 cm²), 1100 UHA (1100 cm²), 1260 UHA (1260 cm²). This range is perfectly suited for the LW and DW and Superfly board ranges.
Building on the success of the HA Speed range, we decided to apply the same profile in order to provide the same smooth take-off but with impressive speed performance. It’s impossible to be disappointed with this UHA range: Speed, Glide and Handling are the three words that best characterise this new range.
To go downwind or flat start, you need to acquire enough horizontal speed to take off.
For a good rider with 80 kg, you need to count on a take-off speed of around 8 to 10 knots.
Once in the air, this wing will be impressive in its speed and ability to fly even at low flight speeds.
It has a very high power base at arms.
It is the little sister of the 1100 and the 1260.
So no surprise on that.
This wing will generate phenomenal power and an even more impressive glide than the 1100 and 1260 at high speeds.
In particular, if you maintain a very high speed, it will never stop propelling you onto another wave.
If I had to choose only one fin, I would have taken this size to sail between 13 and 14 knots, or even more.
It will provide the power base, stability, ease of use and increased maneuverability compared to the two big sisters (1100 and 1260 UHA).
Its large wingspan will allow you to go upwind quickly in a very significant way, and you will be able to descend in a freefly at full speed.
The only limit will be yours
This fin gives you an ultra-smooth and precise gliding experience no matter the line, making it a perfect choice for freeride, wingsurfing and extreme freestyle.
In addition, it rises enormously upwind thanks to its very large wingspan
If you’re not a pumping expert, this fin won’t be for you.
It will be more suitable for light people or for those who run on the pontoon to gain enough speed.
In surf foiling, it’s the machine to reconnect with impressive speed.
The UHA range is not made for jumping.
It was made for downwinding and freeflying, dockstarting, surf foiling but it is not suitable for freestyle. Be careful, the tips are fragile so avoid putting your foil on the tip in the sand or stones.
UHA: Ultra High Aspect Ratio
Speed & Curve & Glide
Profile
Thanks to its curved shape, this fin allows you to hold the tips in the water during turns to avoid falls. Its engineered profile gives you increased speed and forgiveness to quickly reach optimal Vmax while perfectly controlling your trajectories.
Aluminium and carbon foil
Refined Tips
We have refined the tips and increased the flex of the tips (tips of the wing) to facilitate maneuverability and increase the pumping effect of these large gliders while maintaining an ultra slippery profile.
Carbon
pre-preg/ HM
Scalability
This new UHA is a weapon for gliding hard and far with full speed. You will have to master your trajectories to be able to exploit 100% of this new range and in particular this small 800 wing. With more wingspan than a 1190 S for the 800 and more than the 950 HA for the 700, you’ll glide fast effortlessly. The stabilizer 240 and the 180 work. With the 240, the foil will be more stable in the longitudinal axis. With the 180, you unleash the foil at full speed.
Settings: For a size of 80 kg, +1° in wing foil in 180 and 1.5° in downwind in 180.
Take-off speed for a size of 80 kg of a good level is 8 to 10 knots of horizontal speed.
With a wingspan much greater than a 1190 S and a surface area of 930 cm² and a thin thickness of the fin, this 930 is the weapon to overtake everyone on the spot with 12 to 15 knots of wind. Above 15 knots of wind, look no further, this is the foil you need if you want to dominate the spot downwind or freefly.
His ability to go upwind is incredible.
With a wingspan much greater than a 1190 S and a surface area of 930 cm² and a thin thickness of the fin, this 930 is the weapon to overtake everyone on the spot with 12 to 15 knots of wind. Above 15 knots of wind, look no further, this is the foil you need if you want to dominate the spot downwind or freefly. His ability to go upwind is incredible.
In the same way as with the 800 UHA, the two stabilizers 240 and the 180 work very well.
With the 240, the foil will be easier and wiser, especially in the longitudinal axis.
With the 180, you unleash the foil at full speed.
Settings: For a size of 80 kg, +1° in wing foil in 180 and 1.5° in downwind in 180.
The take-off speed for a size of 80 kg of a good level is 8 to 10 knots of horizontal speed.
The 1100 UHA has the same wingspan as the 1350L HA, but with much less string. In addition, the profile used is not the same. We use a Speed profile and with very little thickness. This 1100 UHA will require more technicality to leave as early as the 1350 in light winds. However, you will gain speed and maneuverability. Imagine the speed of a 1190 S with the lift of a 1350 L. It’s just an unbeatable weapon in light winds.
In downwind with 40 cm of chop, you will hurtle down the slopes without stopping. Freefly will become so simple. Finally, in dockstart with a little starting speed, this kite will amaze you with its liveliness and speed on the water.
Settings: For a size of 80 kg, +1° in wing foil in 180 and 1.5° in downwind in 180.
The take-off speed for a size of 80 kg of a good level is 8 knots of horizontal speed.
The 1260 UHA is the lethal weapon for light wind downwind, wing foiling or dockstart and surf foil. With a wingspan of 1179 cm², you will never have flown so early. Pumping will be even easier and faster. The bending of the tips on the last 20 centimeters will allow you to pump more easily while maintaining an exceptional speed.
To optimize the downwind rowing take-off, put more angle on the BCD and slide your DW board to acquire the maximum speed before you start flying. This range is not made for beginners.
Settings: For a size of 80 kg, +1° to 1.5° in wing foil in 180 and 1.5° to 2° in downwind in 180.
The take-off speed for a size of 80 kg of a good level is 8 knots (or even less depending on your level) of horizontal speed
In downwind, the 930 UHA becomes a fin for experienced riders.
You enter a A new dimension: that of high speed in downwind.
The rowing take-off is done between 8 and 10 knots of horizontal speed.
After take-off, the foil accelerates without limit to reach a very high average speed.
In wing freefly, it’s just magical.
It hovers like a 1190 S, but it’s 15 percent faster than the 950 S HA. The acceleration is dazzling and very intense.
The upwind is phenomenal to allow you to get back down quickly on the freefly. The Vmax is approaching 27-28 knots.
It works very well with the 240 stabilizer which will restabilize the foil in the longitudinal axis and restrain the foil a little. The 180 stabilizer will accelerate the foil even more. It will have to be set between +1° and +2° depending on your weight, your level and your discipline.
700 HAU |
800 HAU |
930 HUA |
1100 HAU |
1260 HAU |
|
Aspet Ratio |
11.6 | 11 | 11 | 11 11 | |
Surface |
700 cm2 |
800 cm2 | 930 cm2 | 1100 cm2 | 1260 cm2 |
Scale |
900 mm | 939 mm | 1011 mm | 1100 mm | 1179 mm |
Rope |
103 mm | 110 mm | 118 mm | 130 mm | 136 mm |
Construction |
Prepreg Carbon + High Modulus | Prepreg Carbon + High Modulus | Prepreg Carbon + High Modulus | Prepreg Carbon + High Modulus | Prepreg Carbon + High Modulus |
Your fin is supplied with its protective cover.
The screws needed for the 930 are the M8x 16mm or 20mm (not included)
SROKA SHOP
62 rue de Penhoat – 29850 Gouesnou, France
Timetables
Monday to Friday
9:15 a.m. to 5:45 p.m.
